American DJ FREQ 16 Strobe Instruction Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 17 ©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 18
FREQ 16 Strobe 18 Channel Mode
Channel Value Function
1 - 16 DIMMER
0 - 255 0% - 100%
17 MASTER DIMMER
0 - 255 0% - 100%
18 STROBING
0 - 8 NO FUNCTION
9 - 131 STROBING SLOW - FAST
132 - 139 NO FUNCTION
140 - 181 SLOW OPEN - FAST CLOSE
182 - 189 NO FUNCTION
190 - 231 FAST OPEN - SLOW CLOSE
232 - 239 NO FUNCTION
240 - 247 SOUND ACTIVE STROBING
248 - 255 NO FUNCTION
FREQ 16 Strobe Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
FREQ 16 Strobe Trouble Shooting
FREQ 16 Strobe Fuse Replacement
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 3 xtures maximum. After 3 xtures you will need to
use a new power outlet. They must be the same xtures. DO NOT
mix xtures.
FREQ 16 Strobe Power Cord Daisy Chain
Locate and remove the units power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder has a built-in socket for a spare fuse be sure not to confuse
the spare fuse with active fuse.
FREQ 16 Strobe Photometric Chart
Page view 8
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments