American DJ Mega 24PRO Instruction Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
©American DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 8©American DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 7
LED Display On/Off: To make the display stay ON all of the time
press the MODE and UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.
Operating Modes:
You can use the Mega 24PRO in either a stand alone mode or a mas-
ter/slave configuration, there are 7 modes to choose from:
• Color Mode - Select one of 32 different colors to remain static.
• Program Mode - In this mode you can choose 1 of 12 programs to
run and also adjust the rate of speed.
RGB mode - Control the intensity of all three colors adjusting the
intensity to your desire to create you own desired color.
DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation® Show Designer™.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the
unit. Use standard XLR microphone cables to link your units to-
gether. Remember that the Male XLR connector is the input and
the Female XLR connector is the output. The first unit in the
chain (master) will use the female XLR connector only. The last
unit in the chain will use the male XLR connector only. Note:
You can also daisy chain the power cords, this can only be
done with 20 xtures. After 20 you will need to use a new
power outlet. They must be the same xtures. DO NOT mix
xtures.
2. You will also have to link the power cords to each other, as you
did with the XLR cables.
3. Using the Master unit, choose your desired mode or program and
connect the “Slave” unit or units. The master and slave will sync
Mega 24PRO Operating Instructions
automatically.
Color Mode:
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until “ColMacro
Macro XX” is displayed. “XX” = 0-32.
2. Press the UP or DOWN buttons to scroll through the preset colors
and find your desired color.
Program Mode:
In this mode the Mega 24PRO will change through the different col-
ors.
1. Plug the fixture in and press the MODE button until “ColProgr Progr
XX” is displayed. “XX” = 01-12 & All. There are 12 different preset
programs to choose from. You can also set it to “All” in which all 12
programs will run.
2. Press the UP or DOWN buttons to find your desired program.
3. When you have found your desired program press the MODE but-
ton, “ColSpeed Speed XX” should be displayed. In this menu you
can adjust the running speed of the program, “XX” = 1-16. 1 is the
slowest speed, 16 the fastest speed.
4. You can also run the program in sound active mode. Press the UP
or DOWN buttons until “ColSpeed Speed so” is displayed. You are
now running the program in Sound Active mode.
RGB Mode:
In this mode you can select either red, green, blue, or adjust the col-
ors to make a deisred color, which will remain static. You can adjust
the intensity of each color to make your desired color.
1. Plug the fixture in and press the MODE button until either “ColSet
Red”, “ColSet Green”, or “ColSet Blue” is displayed.
2. You can press the UP or DOWN buttons to adjust the intensity of
the displayed color. When you have adjusted your desired color
press MODE to move to the next color.
DMX Mode:
There are six DMX Channel Modes to choose from: 3 Channels, 6
Channels, 7 Channels, 10 Channels, 12 Channels, and 16 Channels.
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs.
Mega 24PRO Operating Instructions
Page view 3
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments