American DJ Revo Scan LED Instruction Manual download pdf (Page 4)

American DJ® - www.americandj.com - Revo Scan LED™ Instruction Manual Page 7 American DJ® - www.americandj.com - Revo Scan LED™ Instruction Manual Page 8

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin XLR

connectors for DATA transmission in place of 3-pin. 5-pin XLR xtures

may be implemented in a 3-pin XLR DMX line. When inserting stan-

dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be

used, these adaptors are readily available at most electric stores. The

chart below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Pin 5 - Do Not Use

Pin 4 - Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Revo Scan LED™ Set Up Revo Scan LED™ System Menu

ADDR - DMX Address Setting.

1. Tap the either the MENU, UP, or DOWN buttons until “ADDR”

is displayed, press ENTER.

2. A number between 1-512 will be displayed and ashing.

Press the UP or DOWN buttons to nd your desired address.

Press ENTER to set your desired DMX address.

SLND - This will let you set unit as a master or slave in a

master/slave conguration.

1. Tap the either the MENU button until “SLND” is displayed,

press ENTER. “MSTR”, “SL 1” or “SL 2” will be displayed.

2. Tap the UP or DOWN buttons until your desired setting is

displayed, press ENTER to conm and exit.

BLND - Blackout or Stand by mode.

1. Tap the either the MENU button until “BLND” is displayed,

press ENTER. Either Yes or No will be displayed.

2. To activate Blackout tap the UP or DOWN buttons until Yes is

displayed, press ENTER to conm and exit. The xture will now

be in Blackout mode. To deactivate Blackout mode, select No

and press Enter.

I PAN - Pan Inversion

1. Tap the either the MENU button until “I PAN” is displayed,

press ENTER. Either NO or 1 will be displayed.

2. To activate the Pan inversion tap the UP or DOWN buttons

until I is displayed, press ENTER to conm and exit. To deacti-

vate Pan inversion, select No and press Enter.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

American DJ Revo Scan LED Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for DJ controllers American DJ Revo Scan LED